shows a quick and functional example for end-to-end PVC management on FRF.8 SIW connections. Replacing the existing IWF a 7200 router from this example with an IGX switch, is a normal WAN switching environment.
As you can see in the above web link, the ATM vc is OAM managed from the 7200 router. Having an IGX as IWF I can't start an OAM process on the ATM vc.
The IGX can only loopback OAM cells.
Does anyone know a way for and-to-end pvc management on FRF.8 SIW connections on IGX?
Re: End-toEnd signaling for FRF.8 FR to ATM SIW on IGX
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...