Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enhanced FlexWAN Module

I have an Enhanced FlexWAN module in a 6509. I need to swap out one of the port adapters. What part of this is hot-swappable? Can the PA's be removed while the mod is in and switch on? Or is just the mod removable?

Thanks in advance.

5 REPLIES
Silver

Re: Enhanced FlexWAN Module

Hi,

6509 will support Online insertion and removal (OIR) of module. But Could u tell me what port adapater exactly u want to hot swap???

Rgs,

Hall of Fame Super Silver

Re: Enhanced FlexWAN Module

David

Based on my memory from a couple of years ago when I was working with FlexWan the FlexWan card should be hot swappable. The PA is not. (But how would you get to the PA without taking the FlexWan out of the chassis?)

HTH

Rick

New Member

Re: Enhanced FlexWAN Module

So let me get this straight, I can remove the FlexWAN module while the '09 is on. Then remove the 4T1 PA while the mod is out. Right?

Hall of Fame Super Silver

Re: Enhanced FlexWAN Module

David

I never actually did it, but I believe that you are correct. You should be able to remove the FlexWax while the switch is running. And then removing the PAs with the card out of the switch obviously would work.

HTH

Rick

New Member

Re: Enhanced FlexWAN Module

Thanks guys. I got it.

302
Views
0
Helpful
5
Replies