Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Error during OIR

I get the following error message when I insert PA-2FE-ISL-TX into a 7206 VXR NPE-300. Cisco recommends that I call the TAC but wanted give the forum a try first. I got the same result on other 7206 routers.

%PA-2-UNDEFPABRIDGE: Unsupported Port Adaptor Bridge

Thanks,

JK

1 REPLY
Blue

Re: Error during OIR

Using Error Message Decoder: http://www.cisco.com/cgi-bin/Support/Errordecoder/home.pl

1. %PA-2-UNDEFPABRIDGE: Unsupported Port Adaptor Bridge [hex] in bay [dec]

The PCI bridge on the midplane is broken.

Recommended Action: Ensure that your hardware configuration is supported by your Cisco IOS software. Try to reseat the port adapters. If the problem persists, replace the midplane.

Related documents: No specific documents apply to this error message.

82
Views
0
Helpful
1
Replies
CreatePlease to create content