Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Error erasing Flash 3660

Anybody ran into this before?

Rommon 5 > xmodem -y c3660-ds-mz.122-1.bin

Do not start the sending program yet...

File size Checksum File name

11613992 bytes (0xb13728) 0x53f0 c3660-ds-mz.122-1.bin (bad checksum: 0x5

de9)

WARNING: All existing data in flash will be lost!

Invoke this application only for disaster recovery.

Do you wish to continue? y/n [n]: y

Ready to receive file c3660-ds-mz.122-1.bin ...

Erasing flash at 0x30800000sector erase failed at location 0x30800000, status 0x

20202020

flash sector will NOT erase...aborting

2 REPLIES
Cisco Employee

Re: Error erasing Flash 3660

Try doing xmodem filename. Leave out "y"

New Member

Re: Error erasing Flash 3660

I haven't seen that, but some times you can xmodem ? and it will kick you into an xmodem session.

I find tftpdnld to be much faster and easier.

just remember tftpdnld is lower case all other commands must be uppercase.

147
Views
0
Helpful
2
Replies
CreatePlease to create content