Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

error message in the log

I can ping the WAN serial interface, no problem. But I got this error message fill out my log. Any idea??

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 8009E910 8009E8D0 80125E7C 80122908 80008120

Feb 24 15:00:42: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 802068C0

Feb 24 15:01:42: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 80114BB0 80125E7C 80122908 80008120

Feb 24 15:02:42: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 801265FC 80125E7C 80122908 80008120

Feb 24 15:03:42: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 80127608 80125E7C 80122908 80008120

Feb 24 15:04:42: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 800A2E6C 802083A8 8009E8D0 80125E7C 80122908 80008120

Feb 24 15:05:42: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 800A2E6C 802083A8 8009E8D0 80125E7C 80122908 80008120

Feb 24 15:06:43: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 80125E84 80125E7C 80122908 80008120

Feb 24 15:07:43: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 802068BC

Feb 24 15:08:43: %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0, flags 0x8

0

-Traceback= 80050734 80066B60 80026864 8002CC60 8002A860 8014C3B0 8012163C 80140

EF8 80140EF8 801216FC 80206828 80204C50 80208498 80208394 8009E8BC 80125E7C

2 REPLIES

Re: error message in the log

Traceback messages are generally an indication that there is a problem with the IOSimage that you are running. You can start a case with TAC and give them this info. The numbers in the message are used by the SW engineers to locate the error.

You can also try to up- or downgrade your IOS and check if the error goes away.

Regards,

Leo

Community Member

Re: error message in the log

Thanks, Leo

I will log a Cisco TAC case now.

108
Views
0
Helpful
2
Replies
CreatePlease to create content