Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

error message!

--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note --

hi,

i have a cisco router 2620, and avery 5 min, i have this message:

Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

this is my show run

Current configuration : 810 bytes

!

version 12.2

service config

no service timestamps debug uptime

no service timestamps log uptime

no service password-encryption

!

hostname cisco

!

enable secret 5 --moderator edit--

enable password --moderator edit--

!

ip subnet-zero

no ip routing

!

!

no ip domain-lookup

!

!

!

!

interface FastEthernet0/0

ip address 172.16.4.254 255.255.252.0

no ip route-cache

no ip mroute-cache

duplex auto

--More--

whats the probléme?

thank's.

1 REPLY
New Member

Re: error message!

Turn of service config (no service config).

This command tries to catch router config files from the net/server.

114
Views
0
Helpful
1
Replies
CreatePlease login to create content