cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
229
Views
0
Helpful
1
Replies

error message!

ouartil
Level 1
Level 1

--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note --

hi,

i have a cisco router 2620, and avery 5 min, i have this message:

Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/cisco-confg (Timed out)

%Error opening tftp://255.255.255.255/cisco.cfg (Timed out)

this is my show run

Current configuration : 810 bytes

!

version 12.2

service config

no service timestamps debug uptime

no service timestamps log uptime

no service password-encryption

!

hostname cisco

!

enable secret 5 --moderator edit--

enable password --moderator edit--

!

ip subnet-zero

no ip routing

!

!

no ip domain-lookup

!

!

!

!

interface FastEthernet0/0

ip address 172.16.4.254 255.255.252.0

no ip route-cache

no ip mroute-cache

duplex auto

--More--

whats the probléme?

thank's.

1 Reply 1

jhalldn
Level 1
Level 1

Turn of service config (no service config).

This command tries to catch router config files from the net/server.