Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Error Message

Hello

could you help me to understand following Error Message on an 6509 Catalyst Switch?

2006 Aug 29 19:55:07 CEST +02:00 %SYS-3-SYS_LCPERR3:Module 4: Inline Power

Module - PS1 bad: Module needs troubleshooting or TAC assistance

2006 Aug 29 19:55:07 CEST +02:00 %SYS-3-SYS_LCPERR3:Module 4: Inline Power

Module - PS2 bad: Module needs troubleshooting or TAC assistance

2006 Aug 29 19:55:08 CEST +02:00 %SYS-3-SYS_LCPERR3:Module 4: Inline Power

Module - PS3 bad: Module needs troubleshooting or TAC assistance

2006 Aug 29 19:55:08 CEST +02:00 %SYS-3-SYS_LCPERR3:Module 4: Inline Power

Module - PS4 bad: Module needs troubleshooting or TAC assistance

2006 Aug 29 19:55:08 CEST +02:00 %SYS-3-SYS_LCPERR3:Module 4: Inline Power

Module - PS 3.3V bad: Module needs troubleshooting or TAC assistance

2006 Aug 29 19:55:08 CEST +02:00 %SYS-3-SYS_LCPERR3:Module 4: Inline Power

Module - PS volatage bad: Module needs troubleshooting or TAC assistance

The Module is an WS-X6148A-GE-45AF.

Thank you for your help

2 REPLIES
Blue

Re: Error Message

this 6148 GE module has a daughter card on it that provides the power to the ports for PoE.

module number 4 has a problem/failure with the power module on it.

module number 4 should be replaced or at least the daughter card used for PoE replaced.

contact TAC if you can to get a replacement if you don't have a spare and the part is under contract or warranty.

you can use http://cisco.com/TAC or call 800.553.2447.

Community Member

Re: Error Message

Thank you for your help

729
Views
10
Helpful
2
Replies
CreatePlease to create content