Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

error on catalyst 4000 -SYS 4 P2_WARN

Hi,

can you help me to find information about this error.

I 've reset the switch, because it doesn't work properly.

After reboot , all ok.

the log is the follow:

SYS 4 P2_WARN 1/Internal Event: Received normal packet chip 1 pdAddr 0x02b6 on unexpected vpi 0x0004

SYS 4 P2_WARN 1/Internal Event: Received normal packet chip 1 pdAddr 0x08c8 on unexpected vpi 0x0004

SYS 4 P2_WARN 1/Internal Event: Received normal packet chip 1 pdAddr 0x0aad on unexpected vpi 0x0004

SYS 4 P2_WARN 1/Internal Event: Received normal packet chip 1 pdAddr 0x0514 on unexpected vpi 0x0004

SYS 4 P2_WARN 1/Internal Event: Received normal packet chip 1 pdAddr 0x063d on unexpected vpi 0x0004

........................................................

can you help me?

Thanks

FCostalunga

2 REPLIES
New Member

Re: error on catalyst 4000 -SYS 4 P2_WARN

Check this out...

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/78_6301.htm

According to this doc, TAC will give you the answer...

Regards.

Purple

Re: error on catalyst 4000 -SYS 4 P2_WARN

The 4000's had some real ram type problems . A lot of times of reboot will fix things like this . I can't tell you how many supervisors we have replaced since these came out . We continue to see these same type problems to the tune of of at least 1 a month where the supervisor will fail the ongoing ram tests and reboot itself to take the faulty sectors offline...

171
Views
0
Helpful
2
Replies
CreatePlease to create content