ERROR - power supply type mismatch with constellation!
how can I find the compatibility list for 6506 switch supervisor and power. I have a 6506 with sup1A and 1300W power. But when boots I got the following error:ERROR - power supply type mismatch with constellation!
Re: ERROR - power supply type mismatch with constellation!
You can try to use below link of Cisco power calculator that you can configure the power supplies w/ different module. Then you will find which P/S is suitable for you and matched w/ the existing component.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...