cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
776
Views
0
Helpful
1
Replies

etherchannel hello interval 30s?

bennith
Level 1
Level 1

Does anyone point me the reference about the calculation of the hello interval in etherchannel?

This is found that the hello interval 30s is too long in our environement because this is using the STM-1 ethernet connections, which the port would stay up(for the STM-1 connection is still operating) until 30s.

Thanks a lot.

Bennith.

----------------------------------------------------

show etherchannel 1 detail

Group state = L2

Ports: 2 Maxports = 8

Port-channels: 1 Max Port-channels = 1

Protocol: PAgP

Ports in the group:

-------------------

Port: Fa0/1

------------

Port state = Up Mstr In-Bndl

Channel group = 1 Mode = Desirable-Sl Gcchange = 0

Port-channel = Po1 GC = 0x00010001 Pseudo port-channel = Po1

Port index = 0 Load = 0x00 Protocol = PAgP

Flags: S - Device is sending Slow hello. C - Device is in Consistent state.

A - Device is in Auto mode. P - Device learns on physical port.

d - PAgP is down.

Timers: H - Hello timer is running. Q - Quit timer is running.

S - Switching timer is running. I - Interface timer is running.

Local information:

Hello Partner PAgP Learning Group

Port Flags State Timers Interval Count Priority Method Ifindex

Fa0/1 SC U6/S7 H 30s 1 128 Any 29

Partner's information:

Partner Partner Partner Partner Group

Port Name Device ID Port Age Flags Cap.

Fa0/1 ET18SW1 000d.28a2.32c0 Fa0/1 5s SC 10001

Age of the port in the current state: 02d:17h:40m:09s

Port: Fa0/2

------------

Port state = Up Mstr In-Bndl

Channel group = 1 Mode = Desirable-Sl Gcchange = 0

Port-channel = Po1 GC = 0x00010001 Pseudo port-channel = Po1

Port index = 0 Load = 0x00 Protocol = PAgP

Flags: S - Device is sending Slow hello. C - Device is in Consistent state.

A - Device is in Auto mode. P - Device learns on physical port.

d - PAgP is down.

Timers: H - Hello timer is running. Q - Quit timer is running.

S - Switching timer is running. I - Interface timer is running.

Local information:

Hello Partner PAgP Learning Group

Port Flags State Timers Interval Count Priority Method Ifindex

Fa0/2 SC U6/S7 H 30s 1 128 Any 29

Partner's information:

Partner Partner Partner Partner Group

Port Name Device ID Port Age Flags Cap.

Fa0/2 ET18SW1 000d.28a2.32c0 Fa0/2 7s SC 10001

Age of the port in the current state: 03d:19h:15m:37s

Port-channels in the group:

----------------------

Port-channel: Po1

------------

Age of the Port-channel = 17d:17h:53m:16s

Logical slot/port = 1/0 Number of ports = 2

GC = 0x00010001 HotStandBy port = null

Port state = Port-channel Ag-Inuse

Protocol = PAgP

Ports in the Port-channel:

Index Load Port EC state

------+------+------+------------

0 00 Fa0/1 Desirable-Sl

0 00 Fa0/2 Desirable-Sl

Time since last port bundled: 02d:17h:40m:13s Fa0/1

Time since last port Un-bundled: 02d:17h:44m:43s Fa0/1

1 Reply 1

vkapoor5
Level 5
Level 5

I think this is a static value and cannot be tuned. I could not come across a reference which expains the basis on which it is set to this value.