02-27-2006 04:30 AM - edited 03-03-2019 02:01 AM
Hi,
i have got Cisco 6509 running CatOS, how do i set etherchannel, i am bit confussed on this.
02-27-2006 04:47 AM
Hi
I hope u r having native ios on it.fisrt can u tell us weather u want to create a layer 2 ether-channel or layer 3 etherchannel.
go through this link.
02-27-2006 06:33 AM
Hi Anand,
Hope you are doing good!!
Here you go with the link which will guide you hot to setup etherchanne on cat6k running CATOS
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_1/conf_gd/channel.htm
This link has all details about etherchanel and config guidelines with commands to configure etherchannel using both PAGP as well as LACP mode.
Incase you are having NATIVE IOS here you go with the link which wil help you configring both layer 2 and layer 3 etherchannel
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/swconfig/channel.htm
HTH, if yes please rate the post
Ankur
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: