Hello:) We are considering setting up etherchannel between two cisco 3550 switches using a wireless ptp connection that manages about 20mbit each..
How will this work? I guess the switch wont know what speed the link is and will asume it's a 100mbit on each ptp connection.. Will the bandwidh setting on the port change this? By that i mean setting the bandwidth on the port to 20mbit..
Or will I(and that's what i think) get only a redundant connection by doing this?
I don't know if this will work or not , it's a pretty unconventional setup , best bet is to set it up in a lab situation to see if the etherchannel will come up . If it does come up don't know how stable it will be across a wireless link.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...