09-22-2006 04:41 AM - edited 03-03-2019 05:11 AM
Hi
Can you aggregate different port speeds into a single Etherchannel i.e. Can you have 2Gbps Interfaces and 2 100Mps interfaces in the same Etherchannel?
Thanks
Gavin
09-22-2006 04:44 AM
No all interfaces must be the same speed...
09-22-2006 05:02 AM
Hi Gavin,
The interface should be of same type.
Check the link for etherchannel guidelins
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12120ea2/2950scg/swethchl.htm#wp1021856
HTH
Ankur
09-23-2006 08:23 PM
same speed and *duplex*. upto 8 ports per switch i believe.
09-24-2006 01:10 AM
Hi,
http://www.cisco.com/en/US/tech/tk389/tk213/tsd_technology_support_protocol_home.html
you can create 1 FEC and 1 GEC, then the STP will work for you (GEC as primary link, FEC as backup).
HTH
Andrea
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: