Hi anyone please clarify if I were to use the subinterface of ethernet ports(e0/0.1,e0/0.2...) in 2610 to conduct the ISL routing for few VLANs instead of using the fastethernet port, is it alright to that ?
Maximum how many subinterfaces can be created over one physical ethernet port of 2610 ?
Is there any difference by using e0/0 and fast0/0 ?
Re: Ethernet Interface for ISL Routing in 2610 ???
You can find the maximum number of subinterfaces allowed per platform, it is an IOS version dependant.The maximum number of interfaces a router can handle depends on the maximum number of IDBs it can use.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...