Exception while loading a new image 12.3.5 on 2610

[mrarahman]

Hello all,

I get the following error while loading IOS 12.3.5 on a 2610 router with 32MB RAM and 8MB Flash. Could you guys help me out as to why it shows this exception.

---------------------------

|

| Unexpected exception to CPUvector 1100, PC = 0 The following variables

| are OPTIONAL:!!!!!!!!

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BCBOSE: Print setting.

| 0=quiet, 1=progress(default)

|

| Unexpected exception to CPUvector 1100, PC =

| 0!!!!!!!!!!!!!!!!!!!!!!!!!!!!tive help sy

|

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BCefault=7)

|

| !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

| -Tr

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BC

|

|

| Unexpected exception to CPUvector 1100, PC = 0

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BC

|

|

| Unexpected exception to CPUvector 1100, PC = 0

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BC

|

|

| Unexpected exception to CPUvector 1100, PC = 0

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BC

|

|

| Unexpected exception to CPUvector 1100, PC = 0

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BC

|

|

| Unexpected exception to CPUvector 1100, PC = 0

| -Traceback= 0 804940D0 80493B3C 80493EEC 804950BC

|

-----

Thanks

[Georg Pauwen]

Hello,

possible this bug applies to your problem:

CSCin43885

Router reloads when oam enabled

Symptoms: A Cisco 2600 series may unexpectedly reload with messages similar to the following:

Unexpected exception to CPUvector 1100, PC = D0D0D0C

-Traceback= D0D0D0C 8178B6FC 8178F550 8178C524 8179321C 8157CAB0 81A6EB54 81EC300C

Writing crashinfo to flash:crashinfo_20020301-044554 out of room in table, cannot set

"CRASHINFO"

Queued messages:

*Mar 1 04:45:54.627: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console

debugging output.

*Mar 1 04:45:54.611: %DSLSAR-1-SCC_ERR: Interface ATM0/0: SCC Error: tsc_write:

mb_ds->tx_count exceeded max

*Mar 1 04:45:54.611: -Traceback= 81795DC0 8178AB9C 8178B158 8178B54C 8178F550

8178C524 8179321C 8157CAB0 81A6EB54 81EC300C

Conditions: These symptoms are observed when the following two conditions occur:

• The Cisco 2600 series is configured with an asymmetric digital subscriber line (ADSL) or

symmetric high-bit rate digital subscriber line (SHDSL) WAN interface card (WIC).

• OAM is enabled on more than two PVCs (by the oam-pvc manage command) on the same

DSL interface.

Workaround: Do NOT enable OAM on more than two PVCs on the same DSL interface.

Regards,

GP