I just implemented 2 6513's with the same IOS ver and had the same result. Also check your TXLOAD on the "sh int" you will probaly see it at 255/255. The Cisco recommendation was to roll back from: c6sup22-jsv-mz.121-20.E to c6sup22-jsv-mz.121-13.E11 or wait for a new release of the version which is due out soon but no specific date. If you want specific info let me know
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...