cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
437
Views
0
Helpful
1
Replies

Face intermittent ping failure

charleskoh
Level 1
Level 1

Hi Guys, i face intermittent ping failure to a server which is monitor using IP Sentry. But when i do a sh logging buffer on my 6509 switch, i nvr see the port which is connected to the server "leaves". Does that means that the physical connectivity is still there but somehow we just lose the net connection.

I've also sh counters on the port, it state 25 linkchange. but i cant seems to look for the date/time it has linkchange.

Are there any other more commands to troubleshoot this issue.

Pls advise on this.. need help badly

1 Reply 1

lgijssel
Level 9
Level 9

When you know that the linkstate-changecount was 25, you can deduct that the link has stayed up when the counter still reads 25 at any given later time.

Please do a sh int or show port and verifiy your speed/duplex settings. This command will also give you the amounts of errored frames. Check these for changes, if they increase rapidly, you probably have a cabling problem or some other layer2 issue.

Furthermore, you should inspect the data-path between the NMS and the server.

Regards,

Leo

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: