Failed to get the beginning of the configuration file
in RME I have problems with the configuration archive. About 75 % of the attempts to get the running and startup config are failing (but always with changing devices). The message I get is "Failed to get the beginning of the configuration file". Of course the passwords etc. of my devices are O.K. What migth be the problem ? Can this be related to my "welcome banner" configured on the routers ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...