Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Fast Etherchannel Trunk 3524 --> 4006 Switches

Please help,

I would like to set up two switches (3524 and 4006)that will have a Fast Etherchannel running between them.

(over two 100Mb TRUNK ports carrying multiple vlans, using dot1q encapsulation not ISL)

This is posing a bit of a problem for me as im not as familiar with doing this on IOS based switches as i am with SET based switches.

Please can you help with some example configs of the fast etherchannel trunks?

Kindest Regards...

Kai Nicholls

  • Other Network Infrastructure Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Fast Etherchannel Trunk 3524 --> 4006 Switches

Hi Kai,

The following link should help you.

Configuring EtherChannel Between Catalyst 2900XL/3500XL Switches and CatOS Switches

http://www.cisco.com/warp/public/473/44.html

1 REPLY
Cisco Employee

Re: Fast Etherchannel Trunk 3524 --> 4006 Switches

Hi Kai,

The following link should help you.

Configuring EtherChannel Between Catalyst 2900XL/3500XL Switches and CatOS Switches

http://www.cisco.com/warp/public/473/44.html

198
Views
0
Helpful
1
Replies
This widget could not be displayed.