Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Fibre End for a WS-G5484

I have 2 Catalyst 2950G EI with WS-G5484 but I need to know what type of end they are going to need on the fibre. I Was able to pull the type of pibre that we needed to run off the web site but couldn't find anything about the ends. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Fibre End for a WS-G5484

SC is the connector type, if thats what your asking. Here's some info on these G5484's.

http://www.cisco.com/en/US/partner/products/hw/modules/ps872/products_data_sheet09186a008014cb5e.html

Hope this helps you,

Don

1 REPLY
Silver

Re: Fibre End for a WS-G5484

SC is the connector type, if thats what your asking. Here's some info on these G5484's.

http://www.cisco.com/en/US/partner/products/hw/modules/ps872/products_data_sheet09186a008014cb5e.html

Hope this helps you,

Don

81
Views
0
Helpful
1
Replies