Is there a command that you can enter after you have tftp'd an image to a switch that tells you if the image is all there in the correct order. I guess something that does an integrity test on an image.
If you want to MD5 the IOS then probably disk0. Bootflash has a specific purpose and IOS should not be stored there (you do see it sometimes though). Type 'dir' and that will show you the IOS image and where it's stored.
Directory of disk0:/
1 -rwx 123923108 Oct 24 2007 14:02:48 -05:00 s72033-advipservicesk9_wan-vz.122-33.SXH.bin
2 -rwx 82522660 Feb 2 2007 14:40:38 -06:00 s72033-advipservicesk9_wan-mz.122-18.SXF7.bin
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...