Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Firewall Services Module (FWSM) with SUP1A plus MSFC-2 & PFC (CatOS 7.5+)

Is it possible to install a FWSM on a C6509 with SUP1A?

Release Notes for FWSM version 1-1-2(http://www.cisco.com/en/US/partner/products/hw/switches/ps708/prod_release_note09186a008015851e.html#43499) states that FWSM is supported with CatOS 7.5 with a Supervisor Engine 1a, and an MSFC 2 or a Supervisor Engine2 and an MSFC 2.

However, Cisco Configuration Tool gives the following message when you try to configure FWSM with SUP1A:

Configuration Guide

Errors

1. --The selection of one or more WS-SVC-FWM-1-K9 firewall modules requires the selection of a Supervisor2 with MSFC from Cat6500 Primary Supervisor Option. Please adjust your selections.--

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Firewall Services Module (FWSM) with SUP1A plus MSFC-2 & PFC

It's probably a bug in the configurator tool. It is supported with Sup1

Console> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- ---

--------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

2 2 6 Firewall Module WS-SVC-FWM-1 no ok

3 3 8 1000BaseX Ethernet WS-X6408-GBIC no ok

5 5 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAD044505P9

15 SAD04420LM7

2 SAD071903GJ

3 SAD03070279

5 SAD041500VP

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ----------

-----------------

1 00-01-63-d0-6c-d8 to 00-01-63-d0-6c-d9 7.0 5.3(1) 7.6(1)

00-01-63-d0-6c-d6 to 00-01-63-d0-6c-d7

00-02-17-77-98-00 to 00-02-17-77-9b-ff

15 00-04-4d-47-bd-c0 to 00-04-4d-47-bd-ff 1.1 12.1(11b)E

12.1(11b)E11

2 00-0c-85-3f-f5-80 to 00-0c-85-3f-f5-ff 2.0 7.2(1) 1.1(2)

3 00-50-54-6c-92-b0 to 00-50-54-6c-92-b7 1.9 5.4(2) 7.6(1)

5 00-01-97-49-8b-10 to 00-01-97-49-8b-3f 1.2 5.1(1)CSX 7.6(1)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

Sub-Sw

--- ----------------------- ------------------- ----------- ------

------

1 L3 Switching Engine WS-F6K-PFC SAD04440FFV 1.1

1 REPLY
Cisco Employee

Re: Firewall Services Module (FWSM) with SUP1A plus MSFC-2 & PFC

It's probably a bug in the configurator tool. It is supported with Sup1

Console> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- ---

--------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

2 2 6 Firewall Module WS-SVC-FWM-1 no ok

3 3 8 1000BaseX Ethernet WS-X6408-GBIC no ok

5 5 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAD044505P9

15 SAD04420LM7

2 SAD071903GJ

3 SAD03070279

5 SAD041500VP

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ----------

-----------------

1 00-01-63-d0-6c-d8 to 00-01-63-d0-6c-d9 7.0 5.3(1) 7.6(1)

00-01-63-d0-6c-d6 to 00-01-63-d0-6c-d7

00-02-17-77-98-00 to 00-02-17-77-9b-ff

15 00-04-4d-47-bd-c0 to 00-04-4d-47-bd-ff 1.1 12.1(11b)E

12.1(11b)E11

2 00-0c-85-3f-f5-80 to 00-0c-85-3f-f5-ff 2.0 7.2(1) 1.1(2)

3 00-50-54-6c-92-b0 to 00-50-54-6c-92-b7 1.9 5.4(2) 7.6(1)

5 00-01-97-49-8b-10 to 00-01-97-49-8b-3f 1.2 5.1(1)CSX 7.6(1)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

Sub-Sw

--- ----------------------- ------------------- ----------- ------

------

1 L3 Switching Engine WS-F6K-PFC SAD04440FFV 1.1

130
Views
0
Helpful
1
Replies
CreatePlease login to create content