Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Flapping Problem with 2948G

I set a span port 2/48 to monitor from 2/1 to 2/47 for IDS Sensor require. And the switch have not physical loop. The topology is a server connect to 2948G,and 2948G connect to Netscreen.No HSRP,No FEC. Today, I received a log say:

%SYS-4-P2_WARN: 1/Host 00:30:6e:0c:16:96 is flapping between port 2/2 and port 2/48

%SYS-4-P2_WARN: 1/Host 00:07:ec:17:b3:fc is flapping between port 2/48 and port 2/49.

I feel so strange,because the day before everything is ok.What is the reason will cause this problem?

2 REPLIES
Bronze

Re: Flapping Problem with 2948G

What is on ports 2/2 and 2/49? What are the devices with the MAC addresses 00:30:6e:0c:16:96 (HP something) and 00:07:ec:17:b3:fc (a cisco something)...

Is the IDS plugged directly into port 48? And are there any trunks? Hubs?

New Member

Re: Flapping Problem with 2948G

SGI server plugged into 2/2 ,2/49 is a uplink to NetScreen and NetScreen connect to Cisco6509. IDS is Plugged directly into Port 2/48 . No any trunks

104
Views
0
Helpful
2
Replies
CreatePlease login to create content