Flash-File for 2500 Router

[holz]

I want to update the IOS of two 2500 and one 4000 routers, what flash-image can i use?

The 2503 has the c2500-i-l.113-3.bin

the 2504 has the c2500-i-l.113-8.bin

and the 4000 has the c4000-ds-mz_112-10.bin

installed at the moment.

And can i get the 'new' flash without a valid support contact number?

Thank you very much

Holger

[owillins]

You could use the appropriate 12.2 version of IOS based on the features that you would like to have. You will need to have a vaild support contract to download software from the website. Here is the link to the Software Center.

http://www.cisco.com/kobayashi/sw-center/

[s.conway]

for the 2503 if you're going to upgrade from 11.3 to 12.x make sure you have enough flash and DRAM probably 16/16. You may also need to upgrade the boot rom chips.