I added a 16MB flash simm to a 3640 router. I left the original 4MB simm in slot 0. When rebooting the router, I was dropped into ROMMON. Why wasn't the router able to locate and load the original IOS? Does this always happen when adding flash memory? I'm running ver 11.1 and would like to upgrade.
The ios is on the flash. You can also add a PCMCIA/PCCARD to a 3640 to boot flash/config. You can install a PCMCIA in the box copy the IOS to Flashx: upgrade the flash sim. boot the router on the PCMCIA card and the TFTP your upgraded code to the router. Just a suggestion.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.