cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
196
Views
0
Helpful
1
Replies

flash no exist

bgoran
Level 1
Level 1

Hi,

this is my problem:

Router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-K2OSY-M), Version 12.0(3)T3, RELEASE SOFTWARE (f

c1)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Thu 15-Apr-99 13:21 by kpma

Image text-base: 0x80008088, data-base: 0x80701530

ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)

Router uptime is 1 hour, 34 minutes

System restarted by power-on

System image file is "flash:aaa0476.bin"

cisco IPM (MPC860) processor (revision 0x100) with 44237K/4915K bytes of memory.

Processor board ID FOC06160FBG (2484592192), with hardware revision 0000

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

32K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Router#dir ?

/all List all files

null: Directory or file name

nvram: Directory or file name

system: Directory or file name

xmodem: Directory or file name

ymodem: Directory or file name

Unknown file system <cr>

Router#show file system

File Systems:

Size(b) Free(b) Type Flags Prefixes

29688 29179 nvram rw nvram:

- - opaque rw null:

- - opaque rw system:

- - opaque ro xmodem:

- - opaque ro ymodem:

- - network rw tftp:

- - network rw rcp:

- - network rw ftp:

Where is flash directory?

Thanks,

Goran.

1 Reply 1

tepatel
Cisco Employee
Cisco Employee

Lets see what "sh flash" reports..Tejal

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: