Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Flash Partitioning

The flash on one of my router was partitioned into 2 partition by my pre-decessor and now I wanted to de-partition it into one single partition. The current config is:

partition flash 2 4 8

and I would guess that by issuing the command:

no partition flash 2 4 8

will give me back one partition. The question is does anyone know of any issue that I have to watch out for when repartitioning? Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Flash Partitioning

i would say, first before doing anything else, back up any files on flash(including IOS image and saved configs) on to a tftp server, and then play with the partitions.

I think when you give no partition command, the file system in flash will be completely erased.

2 REPLIES

Re: Flash Partitioning

i would say, first before doing anything else, back up any files on flash(including IOS image and saved configs) on to a tftp server, and then play with the partitions.

I think when you give no partition command, the file system in flash will be completely erased.

New Member

Re: Flash Partitioning

I've already done all that. Saved configs and IOS. Thanks for your feedback.

80
Views
0
Helpful
2
Replies
CreatePlease login to create content