Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FR Traffic Policing

In the output of "show frame-relay pvc int s0/3 234" policing is always disabled by reason "invalid configuration". Why ?

My configuration:

interface Serial0/2

no ip address

encapsulation frame-relay

no fair-queue

frame-relay interface-dlci 234 switched

class mypolicing

frame-relay lmi-type ansi

frame-relay intf-type dce

frame-relay policing

interface Serial0/3

no ip address

encapsulation frame-relay

no fair-queue

frame-relay interface-dlci 234 switched

class mypolicing

frame-relay lmi-type ansi

frame-relay intf-type dce

frame-relay policing

map-class frame-relay mypolicing

frame-relay tc 100

frame-relay cir in 600

frame-relay cir out 600

frame-relay bc in 600

frame-relay bc out 600

frame-relay be in 100

frame-relay be out 100

frame-relay holdq 10

no frame-relay adaptive-shaping

connect R2-to-R4 Serial0/3 234 Serial0/2 234

R3#sho frame-relay pvc int s0/3 234

PVC Statistics for interface Serial0/3 (Frame Relay DCE)

DLCI = 234, DLCI USAGE = SWITCHED, PVC STATUS = ACTIVE, INTERFACE = Serial0/3

input pkts 5 output pkts 11 in bytes 520

out bytes 2722 dropped pkts 0 in FECN pkts 0

in BECN pkts 0 out FECN pkts 0 out BECN pkts 0

in DE pkts 0 out DE pkts 0

out bcast pkts 0 out bcast bytes 0

switched pkts 5

Detailed packet drop counters:

no out intf 0 out intf down 0 no out PVC 0

in PVC down 0 out PVC down 0 pkt too big 0

shaping Q full 0 pkt above DE 0 policing drop 0

pvc create time 00:02:49, last time pvc status changed 00:02:41

policing disabled: invalid configuration, 0 pkts marked DE

policing Bc 600 policing Be 96 policing Tc 1000 (msec)

in Bc pkts 0 in Be pkts 0 in xs pkts 0

in Bc bytes 0 in Be bytes 0 in xs bytes 0

Thanks.

2 REPLIES
Silver

Re: FR Traffic Policing

Add R3 (config)#map-class frame-relay mypolicing

That’s all I see at a glance. Let me know if that does it for you.

New Member

Re: FR Traffic Policing

But map-class frame-relay mypolicing is already defined on R3 (see it after Serial0/3 configuration).

82
Views
0
Helpful
2
Replies