have a question concerning the use of this command on a frame-relay interface.
Frame-Relay IP RTP Header Compression: compresses an IP/UDP/RTP packet
My question is:
If frame-relay ip rtp header-compression is applied to an interface does it work only with IP/UDP/RTP headers utilizing the udp port range that Cisco uses for their IP Telephony products (16384-32767), or will it work on any port range as long as an RTP header is present? For that matter, if an RTP header is not present will this command still compress the IP/UDP header much the way the frame-relay ip tcp header-compression command compresses IP/TCP header?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...