Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

frame-relay switching

Hi guys!

Just one question, i have a router, with 2 serials with frame-relay on it (working as DTE), and other serial with HDLC, but in order to configure QoS on a 4th. serial, i`ve got to configure frame-relay switching on this other serial...my question is...does this affect the other serial interfaces?

I need to add something like this:

!

frame-relay switching

!

interface Serial0/1

description xxxxxxxx

no ip address

encapsulation frame-relay

frame-relay traffic-shaping

frame-relay intf-type dce

!

Thanks!!

2 REPLIES
New Member

Re: frame-relay switching

Here's a link regarding FR Switching:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a0080087d01.html#1003345

The above link has a 'hybrid' example that implies this is possible. I seem to recall successfully trying this in a lab environment, but maybe someone else can confirm.

Good Luck!

Jeff

New Member

Re: frame-relay switching

I've got a 2523 that I use as a frame-relay switch, and as regular HDLC connections to other routers. The frame-relay switching command just seems to allow you to use the fram-relay route command. Without frame-relay switching, the router wwill not allow you to use frame-relay route.

HTH,

Joe

176
Views
0
Helpful
2
Replies
CreatePlease login to create content