Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Frame-relay

I have frame-relay 3 subinterfaces, the first is mean for clean bandwidth for the internet with cir 128 kbps , secomd one is for the vpn traffic with cir of 48kbps & the third one is for the again shared internet bandwidth with cir of 256 kbps, all traffic is coming on the same ethernet interface of 1751 cisco router from LAN side , now how do i route the traffic for vpn on particular interface which is meant for it & other two internet traffic on different interface, also when the leased line goes down the back should kick start with one bri port for the VPN & the second BRI port for the both the shared & clean internet bandwidt, can you tell me steps how to go about doing the same.

1 REPLY
New Member

Re: Frame-relay

Wow, what a great question! What VPN software are you using? I've never done this before, does anyone have an example handy???

http://www.cisco.com/warp/public/471/top_issues/vpn/iosvpn_index.shtml

74
Views
0
Helpful
1
Replies