Hello,
I have a hub and spoke topology with Frame Relay. My hub is connected to the Frame relay operator with an E3 (34M) link. I have implemented Frame Relay Traffic shaping with Priority Queueing on all Frame relay pvc (with frame-relay class).
My problem is: On all the pvc (sh frame-relay pvc xxx), i continually see that I have packet delayed although there isn't any congestion.
Is my undertanding of FRTS correct with this configuration example:
Operator provisionning: Line speed (34M); pvc with CIR=1024, EIR=0
My configuration:
map-class frame-relay 1024_
frame-relay cir 1024000
frame-relay bc 128000
frame-relay mincir 1024000
no frame-relay adaptive-shaping
frame-relay priority-group 2
!
I wonder if line speed (34M) must be specify somewhere in the configuration.
Thans a lot for your help