Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

FRTS

Hello,

I have a hub and spoke topology with Frame Relay. My hub is connected to the Frame relay operator with an E3 (34M) link. I have implemented Frame Relay Traffic shaping with Priority Queueing on all Frame relay pvc (with frame-relay class).

My problem is: On all the pvc (sh frame-relay pvc xxx), i continually see that I have packet delayed although there isn't any congestion.

Is my undertanding of FRTS correct with this configuration example:

Operator provisionning: Line speed (34M); pvc with CIR=1024, EIR=0

My configuration:

map-class frame-relay 1024_

frame-relay cir 1024000

frame-relay bc 128000

frame-relay mincir 1024000

no frame-relay adaptive-shaping

frame-relay priority-group 2

!

I wonder if line speed (34M) must be specify somewhere in the configuration.

Thans a lot for your help

1 REPLY
New Member

Re: FRTS

Do let me know if I'm wroing but for my configuration, the mincir is the CIR rate and the cir is actually the Access rate (34M in your case).

176
Views
0
Helpful
1
Replies
CreatePlease to create content