Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

G703/G.704 connecting to CSU

All,

We have network as :

(7200 E1 G.703 Adapter) -----> (CSU)--->(V.35 3600).

The configuration on router 7206 (S1/0) as :

ip address 10.160.8.6 255.255.255.252

time-slot 1-31

crc4

ts16

clock-source line

serial-restart-delay 0

configuration on router 3600 (s1/3) as :

ip address 10.160.8.5 255.255.255.252

serial-restart-delay 0

configuration on CSU

- Network Mode : E1(DS1E)

- DTE Conf : nx64kbps

- Line code : HDB3

- Frame mode : CRC-4

- Data rate : 1984 kbps n=(31)

- Clock mode : internal

Is there any idea why router can not talk each other? Even we see interface and protocol is up.

Thank you

1 REPLY
Anonymous
N/A

Re: G703/G.704 connecting to CSU

My idea is that the E1 frame is not alike. Is it ok to set both sides to "unframed"...Just try...

112
Views
0
Helpful
1
Replies
CreatePlease to create content