Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Gbic modules

hello

i have 4 cat 2924M-XL switchs:2 switches in each rack. the 2 racks are connected via 100M optic fiber (multi-mode). so we have a 2-ports 100baseFX module in one switch of each rack.

the cascade between the 2 switches of each rack is made via 10/100Base T.

now we want to upgrade the connection between the 2 racks for 1Gbps, and to make the same thing for the cascade between the 2 switches of one rack.

i'm not sure about what modules i must use:

-Gbic-based 1000BaseX (WS-X2931-XL) and/or

-1000 baseT (WS-X2932-XL) and/or

-Gigastack GBIC (WS-X3500-XL) and/or

-SX GBIC (WS-G5484=) and/or

-LX GBIC (WS-G5486=) and/or

can you help me?

2 REPLIES
Cisco Employee

Re: Gbic modules

The 2924M-XL has two slots for modules and you could use either WS-X2931-XL or the WS-X2932-XL. The former needs regular fiber GBICS(WS-G5484)while the latter uses copper GBICs(WS-G5483)

Regards,

-Prashanth

New Member

Re: Gbic modules

thx for these useful infos

123
Views
0
Helpful
2
Replies
CreatePlease to create content