You can't use the same network if you are going to connect the network like this . Subnetting will allow to divide the one big Class a,b or c networks to small subnets means small network..
like the mask 255.255.255.240 will be allow you to have the 14 host -
like 22.214.171.124--- 126.96.36.199 is valid IP address for one subnet (network -188.8.131.52), then 184.108.40.206-220.127.116.11 for second range( 18.104.22.168). and so on there no overlapping ip address
then you networks are overlapping and that 'll not work.
In you configuration if I assume XXX=same number like 1
for first two routers - you can have 22.214.171.124 and router B interface should be 126.96.36.199 and for the end routers -- 188.8.131.52-- 184.108.40.206 with mask 255.255.255.240 for all the top and bottom routers. and if you want to use differnent subnets mask for more host, make sure you don't have overlapping ips.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.