Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Getting Memory and cpu utilization on GSR line card via SNMP

i wonder if i can get cpu/memory/etc.. on a line card using SNMP

for example, in the CLI i can use 'execute-on slot 7 show proc cpu' to see cpu utilization on the line card itself...

but i couldn't find any oid to get it via snmp.

if anyone knows how to get it (if it can be) please specify which oid you use.

thanks

2 REPLIES
Blue

Re: Getting Memory and cpu utilization on GSR line card via SNMP

CISCO-PROCESS-MIB gives you the CPU utilization of each linecard

and RP in a GSR. Support for monitoring linecards using this MIB is added from 12.0(21)S.

For Memory Utilization you can use the CISCO-ENHANCED-MEMPOOL-MIB whose support is added since 12.0(21)S.

New Member

Re: Getting Memory and cpu utilization on GSR line card via SNMP

thanks, it seems to work just fine now.

took me some time to alter my scripts for the cross-reference to get the card description for each mempool and CPU..

here are the oids for those who wish to save some effort :)

cempMemPoolName 1.3.6.1.4.1.9.9.221.1.1.1.1.3

cempMemPoolUsed 1.3.6.1.4.1.9.9.221.1.1.1.1.7

cempMemPoolFree 1.3.6.1.4.1.9.9.221.1.1.1.1.8

cempMemPoolType 1.3.6.1.4.1.9.9.221.1.1.1.1.2

cpmCPUTotalPhysicalindex 1.3.6.1.4.1.9.9.109.1.1.1.1.2

cpmCPUTotal5secRev 1.3.6.1.4.1.9.9.109.1.1.1.1.6

cpmCPUTotal1minRev 1.3.6.1.4.1.9.9.109.1.1.1.1.7

entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.2

entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7

477
Views
14
Helpful
2
Replies
CreatePlease login to create content