I am not sure about this particular error. But Traceback messages usually reflect an error in the operating system code. I would suggest that you look in the Cisco Bug Toolkit for the particular version of code running on the switch and see if there are any bugs identified which sound like this one.
Depending on how often this happens and how severe the impact it, you might also consider upgrading the code to a more recent version and see if that fixes the problem.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...