Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

GLBP?

Hi!

i have 6509 SUP1-2GE.THIS BOX Run IOS"c6sup11-dsv-mz.121-20.E2".THIS BOx with this IOS support GLBP?& THIS IOS Contain bugs or not?if so how can update this IOS?ALSO WHICH IOS I NEED TO RUN GLBP In this box?

10xs for ur help!

Ali

11 REPLIES

Re: GLBP?

Hi Alsayed,

can you just the post full IOS name? eg. c6sup1xxxxxx.bin" i couldn't find any matching related the IOS name mentioned. based on that IOS image name i can tell you clearly about the features.

Community Member

Re: GLBP?

Hi Friend

this is the full name in my IOS:c6sup11-dsv-mz.121-20.E2.can U Help in this?

10XS

Ali

Re: GLBP?

ali,,,

i think you have to go for the catOS:cat6000-supcvk8.8-5-3.bin, its require 128DRAM and 16 Flash...

you can also check it out in feature nevigator:http://tools.cisco.com/ITDIT/CFN/

and search by feature and then platform...

hope this will help you

rate this post if it helps

regards

Devang

Community Member

Re: GLBP?

Hi Devang

10XS FOR RESPONSE/

Devang;I Dont have CATos,on the box i have Native IOS ON BOX

Re: GLBP?

i couldn't find any relavant name for the one which you hav posted, so can you check "dir bootflash:" & past me the exact one also tell me ur existing DRAM & flash size.based on that if any updated CatOS is required we can came to whether additional DRAM/Flash is required.

Community Member

Re: GLBP?

HI FRIEND!

Have a look to this output...

Router#show boot

BOOT variable = slot0:c6sup11-dsv-mz.121-20.E2,1

CONFIG_FILE variable does not exist

BOOTLDR variable = bootflash:c6msfc-boot-mz.121-3a.E7

Configuration register is 0x2102

Standby is not up

.......................................................

Router#dir bootflash:

Directory of bootflash:/

2 -rw- 5118776 Jan 1 2000 00:10:47 +00:00 c6msfc-is-mz.120-7.XE1

3 -rw- 1665640 Feb 14 2000 21:51:26 +00:00 c6msfc-boot-mz.121-3a.E7

4 -rw- 6138572 Feb 14 2000 21:52:25 +00:00 c6msfc-ds-mz.121-3a.E7

5 -rw- 17619 May 16 2004 19:08:40 +00:00 startup-configr

Community Member

Re: GLBP?

friend!

64 flash card

128 dram.

i have only native IOS FOR SUP & MSFC

10XS

Re: GLBP?

ali,,,

actully i am also looking for the GLBP on IOS ... but i am wondaring that i am not able to get the documet for it...even in future navigator i tried to search but its only showing me the catOS support of GLBP for cat6000 ...so i also looking for that...

regards

Devang

Gold

Re: GLBP?

If you have access to the feature navigator tool you should be able to find this.

I quicky looked and it does not appear to be supported on the sup1 card you will need a sup2 or sup720.

Re: GLBP?

but which ios not catOS...which ios support GLBP...on this switch...please give me image name and ios number

regards

Devang

Gold

Re: GLBP?

None.

There are no catos or ios that will run on a sup1 that have this feature. You need a sup2 or better.

171
Views
3
Helpful
11
Replies
CreatePlease to create content