Is anyone aware of a more elegant solution to obtain our coordinates? Suppose we have a router in a bunch of vehicles and, among other things, want to always be aware of their location. Besides running a script to constantly login every 30 seconds and do a screen scrape of this command, is there a better way to do it? Is there a protocol meant to exchange this? Send an SNMP/syslog trap every 30 seconds? EEM?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...