Two Cisco6509 w/msfc no VTP. Vlan routing hsrp groups on a vlan interface basis. Presently tunneling multicast in GRE over a set of nokia440/checkpoint FW solution running VRRP to a set of Cisco2621 routers. The problem is taking full advantage of HSRP. Can I terminate/source a GRE tunnel on an HSRP interface? I don't mean the physical interface- rather the virtual or shared interface. This would mean I could use one tunnel instead of two with creative HSRP tracking to force a symmetrical device failover.
Thanks a million - Production environment, of course.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...