Hardware support on new Cat6500 SUP720 (WS-X6548-GE-TX and WS-SVC-NAM-2)
We are planning a new deployment with Cat6500 and SUP720, and we are interested on installing the 48-port fabric-enabled 10/100/1000 Module (WS-X6548-GE-TX) but it is not supported with latest 12.2()SX available today.
Re: Hardware support on new Cat6500 SUP720 (WS-X6548-GE-TX and W
The customer is willing to have installed WS-SVC-NAM-2 and WS-X6548-GE-TX with Sup720. As was posted before NAM2 is supported on IOS 12.2(14)SX1 and newer versions, but these releases doesn't support WS-X6548-GE-TX yet. On the other hand, WS-X6548-GE-TX is supported on CatOS 8.1.1 but this release doesn't support WS-SVC-NAM-2.
Is it already planned the support of WS-X6548-GE-TX within IOS12.2()SX? Is there any other option for the compatibility between this 2 modules?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...