Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HELP NEEDED on Dial-in with ACS (Tacacs+)

Hi Gurus,

I have a network design,

ACS---PIX----PIX---NAS---DIal-in

When the user dial-in the error msg (attached). The ACS has been configure with the NAT eth0/0 and hostname also the tacacs+ key from the NAS Router. I could not found any referrence for the error msg from the cisco.com. Please help gurus

Thanks in Advance.

HATO

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: HELP NEEDED on Dial-in with ACS (Tacacs+)

Hato,

It looks like the NAS is unable to open a tcp connection with the ACS server (Error connecting to socket 0). Have you checked either of the PIX firewall logs for denied packets/connections to the ACS server?

~Zach

1 REPLY
Bronze

Re: HELP NEEDED on Dial-in with ACS (Tacacs+)

Hato,

It looks like the NAS is unable to open a tcp connection with the ACS server (Error connecting to socket 0). Have you checked either of the PIX firewall logs for denied packets/connections to the ACS server?

~Zach

94
Views
0
Helpful
1
Replies
CreatePlease login to create content