Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Help OUT service policy problem on c10k 24-P-T1-E1 card !!!!

Hi,

Am trying to configure the following on ESR C10k with 24P-T1-E1 card with IOS c10k-p10-mz.120-23.SX.bin and FR encapsulation

map-class frame-relay OUT_FR_MAP_CLASS_bollywood_t1-e1-qos

service-policy input IN_bollywood_t1-e1-qos

service-policy output OUT_bollywood_t1-e1-qos

frame-relay fragment

!

interface Serial1/0/2:1.91 point-to-point

frame-relay interface-dlci 91

class OUT_FR_MAP_CLASS_bollywood_t1-e1-qos

entering the cmd class OUT_FR_MAP_CLASS_bollywood_t1-e1-qos give me the following error:

OUT_bollywood_t1-e1-qos cannot be used on a subinterface.

Any clue on the error!!!!

thx

hanu

PS: policies IN and OUT hs been defined and configured with relevent class cmd.

1 REPLY
Silver

Re: Help OUT service policy problem on c10k 24-P-T1-E1 card !!!!

check for the order of the command how you have applied ,the link below may be useful

http://www.cisco.com/warp/public/105/cbwfq_frpvs.html

130
Views
0
Helpful
1
Replies
CreatePlease to create content