03-04-2004 02:33 AM - edited 03-02-2019 02:01 PM
please candid help on this, i'm actually using a 1720 router for practice and have to erase the flash for another practice. but unfirtunately he bring an error message that
Load prog: bad file magic number 0X0.
boot: cannot load flash.
he keep on going to rommon prompt. ive tried all i could but no way.
help!!!!
03-04-2004 07:00 AM
The quickest way to recover is from the rommon prompt enter these commands:
IP_ADDRESS=
IP_SUBNET_MASK=
DEFAULT_GATEWAY=
TFTP_SERVER=
TFTP_FILE=
For the IP_ADDRESS variable, enter in a temporary IP for the router
For the IP_SUBNET_MASK variable, enter in a temporary subnet mask for the router
For the DEFAULT_GATEWAY variable, enter in a temporary default gateway for the router (if needed)
For the TFTP_FILE variable, enter in the ios image name on your tftp server for this router
e.g.
IP_ADDRESS=192.168.10.5
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.10.1
TFTP_SERVER=192.168.10.100
TFTP_FILE=ios_image.bin
Then type in
tftpdnld
-HTH
03-11-2004 06:48 AM
Hi.I am also getting the same error when I am booting up my layer3 switch.
From the ROM Mode I tried the feature but it is giving the error.
Even if I used the Xmodem feature on the hyperterminal, it is giving me the error "No response from the remote system"
Can you pls help me out to get my switch up and running with the new IOS.
03-11-2004 05:24 PM
What particular L3 switch do you have? Try the following references:
[Cat6000]
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml
[Cat2950,3550]
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
03-12-2004 01:18 AM
I am using Catalyst 4840G switch.
I have tried installing IOS in the switch from the hyperterminal using Xmodem but it is giving an error.
The error displayed "Remote system Not response"
If I use Xmodem from Rommode it is still unable to copy the IOS.Is it the problem with the Flash card.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: