help required to configure a 801 ISDN router and remote PC
I have little experience with cisco routers, but have been requested to connect a remote PC with an ISDN card to a corporate LAN, I have an 801 router on the corporate LAN available for use but have never configured one before to do this - neither have I configured a remote PC to access a LAN with an ISDN card!!! I would appreciate an idiots guide on how to do both sides of the connection and a sample router config if poss. if anyone knows of a good book describing such a connection, that would be useful too. thanks for any help.
Re: help required to configure a 801 ISDN router and remote PC
Try searching on 'isdn configuration guide' on CCO. You might also want to add your IOS release to the search string. Conversely, go to this link and select your IOS. Then narrow it down to ISDN and/or dial solutions.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...