01-06-2003 08:37 AM - edited 03-02-2019 03:57 AM
Hello all,
I inherited a router from a customer a few weeks ago. In spite of all my efforts, it continues to display the following messages on the console:
%Error opening tftp://255.255.255.255/test-260.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/test-2600-confg (Timed out)
%Error opening tftp://255.255.255.255/test-260.cfg (Timed out)
I've checked all my boot parameters an everything seems to be in order.
opyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 19-Nov-02 21:04 by pwade
Image text-base: 0x8000808C, data-base: 0x80A04D10
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Test-2600 uptime is 19 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.122-13.bin"
cisco 2621 (MPC860) processor (revision 0x600) with 27648K/5120K bytes of memory
.
Processor board ID JAD06020BSF (3379297637)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102 (will be 0x2002 at next reload)
My only clue is with the config register on the last line.
What am I missing??
Thanks all.
-Peter
Solved! Go to Solution.
01-06-2003 09:05 AM
try no service config
01-06-2003 09:05 AM
try no service config
01-06-2003 09:18 AM
Thanks! Problem solved.
-Peter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: