I made 3 vlans an it vlan 1 10.71.32.2 255.255.252.0 Vlan 20 10.71.48.1 255.255.254.0 and Vlan 30 10.71.60.1 255.255.255.0 now i need another ip address connected to vlan 1 but i still need to keep the one i use atm, so is it possible to add a second ip to the same vlan or not ?
You can assign a second ip in the same way as it is don on a physical interface: add the keyword secondary after the IP adress and mask:
ip addr 10.22.1.4 255.255.0.0 secondary
In general it is not adviseable to use more than one ip subnet on the same cable or vlan. This should only be used in situations where it is a temporary solution, for example for an IP adressmigration. On a vlan-capable switch you can simply create an extra vlan.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...