Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Hierarchical Policy on FrameRelay Subinterfaces

hi,

i tried the following cbwfq-config on my fr-subinterface on an cisco3640 router:

( i want to implement hierarchical-policy based on framerelay pvc )

!

class-map match-any bank_kematen

match access-group name bank_kematen

class-map match-any bank_pichl

match access-group name bank_pichl

class-map match-any bank_meggenh

match access-group name bank_meggenh

class-map match-any bank_offenh

match access-group name bank_offenh

!

policy-map trunk_kematen

class bank_kematen

police 243000 7500 7500 conform-action transmit exceed-action drop

service-policy policy_256

class bank_pichl

police 243000 7500 7500 conform-action transmit exceed-action drop

service-policy policy_256

class bank_meggenh

police 243000 7500 7500 conform-action transmit exceed-action drop

service-policy policy_256

class bank_offenh

police 243000 7500 7500 conform-action transmit exceed-action drop

service-policy policy_256

!

!

policy-map policy_256

class dedect_voip

priority 80

class dedect_premium

bandwidth percent 30

class dedect_gold

bandwidth percent 20

class dedect_silver

bandwidth percent 10

class class-default

fair-queue

!

!

interface Serial0/1.130 point-to-point

description Verbdg. nach Kematen/Meggenhofen

bandwidth 384

no ip mroute-cache

no cdp enable

frame-relay class trunk_kematen

frame-relay interface-dlci 130

!

!

map-class frame-relay trunk_kematen

frame-relay adaptive-shaping becn

frame-relay cir 487000

frame-relay bc 48700

frame-relay be 0

!

br-wels1#

br-wels1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

br-wels1(config)#!

br-wels1(config)#map-class frame-relay trunk_kematen

br-wels1(config-map-class)#serv

br-wels1(config-map-class)#service-policy out trunk_kematen

CBWFQ : Hierarchy not supported for Frame Relay VCs

Removing service policy from map-class

br-wels1(config-map-class)#

So it seems a 3640 or my ios has no support for this !

Any idea if this is "only" a proble of the 3640 serie or is this a case of my ios ???

br-wels1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(7b), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Mon 04-Mar-02 23:11 by pwade

Image text-base: 0x600089A8, data-base: 0x611B4000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f

c1)

br-wels1 uptime is 2 weeks, 4 days, 6 hours, 12 minutes

System returned to ROM by reload at 03:00:00 MEZ Fri Jan 24 2003

System restarted at 03:00:59 MEZ Fri Jan 24 2003

System image file is "flash:c3640-is-mz.122-7b.bin"

cisco 3640 (R4700) processor (revision 0x00) with 61440K/4096K bytes of memory.

Processor board ID 22725031

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

4 Serial network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

br-wels1#

I did not find a solution in the software-advisor !

Thanks for any help and greetings from austria !

1 REPLY
Community Member

Re: Hierarchical Policy on FrameRelay Subinterfaces

This command was integrated into Cisco IOS Release 12.1(5)T, so my guess is its related with the product itself.

79
Views
0
Helpful
1
Replies
CreatePlease to create content